Multifix PSF+
Specification
-
Applications
- For installation in non-cracked concrete (option 7) (ETA-21/0664)
- For installation in masonry (ETA-22/0438)
- Approved for anchor rods M8, M10, M12, M16, M20, M24 (concrete)
Notice
Please observe the corresponding approvals during planning and processing.
The storage temperature must not permanently exceed 25 °C! Please store upright! -
Properties
- Polyester, styrene-free
-
Technical specifications
- Processing with common applicator gun possible
- Can be used in wet concrete and water-filled drill holes
- Delivery including mixing nozzle
Filter
Selected filters
| Orderidentifier | Article Number | Contents ml | Composite mortar | Amount mixing nozzle | Unit |
|---|---|---|---|---|---|
| Multifix PSF+ 420ml | 9573000410 | 420.0 | Polyester, styrene-free | 1 | 1 |
Specifications
|
|||||
| Multifix PSF+ 300ml | 9573002300 | 300.0 | Polyester, styrene-free | 1 | 1 |
Specifications
|
Multifix Calculator
Calculate the mortar cartridges required for your project with this calculation tool. It will help you to reduce waste and make your installation more cost-effective.
- Select thread diameter from the list on the far left.
- Select the number of holes to fill by entering them in the text box above the illustration or alternatively use the plus and minus buttons.
- Select the drilling depth using the plus and minus buttons in the illustration.
- Done! The number of mortar cartridges required is now displayed.