Mortar cartridge Multifix USF winter
Specification
-
Applications
- For installation in cracked concrete (option 1) and non-cracked concrete (option 7) (ETA-16/0107)
- For installation in masonry (ETA-16/0089)
- For installation in natural stone (without approval)
- Approved for anchor rods M8, M10, M12, M16, M20, M24, M27, M30
Notice
Please observe the corresponding approvals during planning and processing.
The storage temperature must not permanently exceed 25 °C! Please store upright!
-
Properties
- Vinyl resin, styrene-free
-
Benefits
- Cartridge temperature may conform to the low outside temperature
- Shorter curing times at low temperatures
- Processing with common applicator gun possible
- Can be used in wet concrete and water-filled drill holes
- Delivery including mixing nozzle
| Orderidentifier | Article Number | Contents ml | Amount mixing nozzle | Unit |
|---|---|---|---|---|
| Mortar cartridge USF 300 ml winter | 9571000300 | 300.0 | 2 | 1 |
Specifications
|
Multifix Calculator
Calculate the mortar cartridges required for your project with this calculation tool. It will help you to reduce waste and make your installation more cost-effective.
- Select thread diameter from the list on the far left.
- Select the number of holes to fill by entering them in the text box above the illustration or alternatively use the plus and minus buttons.
- Select the drilling depth using the plus and minus buttons in the illustration.
- Done! The number of mortar cartridges required is now displayed.