Unrestrained fastening – Rear-Ventilated Facades Guidebook Part 7
The 7th and last part of our guidebook on rear-ventilated facades deals now with the unrestrained fastening of cladding panels.
Construction Blog
Fastening advices for experts
The right selection of substructure – Rear-Ventilated Facades Guidebook Part 6
In the 6th part of our guidebook we focus on the selection of the right material for the substructure and the formation of fixed and sliding points.
Anchoring with through bolts and injection systems – Rear-Ventilated Facades Guidebook Part 5
The fifth part of our guidebook on rear-ventilated facades deals with the use of through bolts and presents the possibility of anchoring by means of an injection system.
Correctly inserting plastic facade anchors – Rear-Ventilated Facades Guidebook Part 4
The fourth part of our guidebook on rear-ventilated facades deals with the correct selection and installation of plastic facade anchors.
Single or multiple fastening of non-load-bearing systems – Rear-Ventilated Facades Guidebook Part 3
The third part addresses the properties and special features of a single or multiple fastening of non-load-bearing systems, which also includes the rear-ventilated facade.
Embedment mechanisms at a glance – Rear-Ventilated Facades Guidebook Part 2
In the second part of the Guidebook, we take a closer look at the different embedment mechanism of rear-ventilated facades.
Design and advantages – Rear-Ventilated Facades Guidebook Part 1
The first part of our new guidebook on the subject of "Rear-Ventilated Facades" describes the design and advantages of this special type of facade.