amongst others clips to thin-walled steel substructures
![[JT3-DH-2H-6_5-7_0].png](/medias/sys_master/products/products/hfd/h71/9107064061982/-JT3-DH-2H-6-5-7-0-135Wx135H.png "[JT3-DH-2H-6_5-7_0].png")
![[JT2-12-5_5].png](/medias/sys_master/products/products/h98/h0f/9106887376926/-JT2-12-5-5-135Wx135H.png "[JT2-12-5_5].png")
For fixing facade panels with reduced swarf
For fixing facade panels with reduced swarf
The EJOT self-drilling screws feature a classic drill point. They drill, form the thread and fasten components in one work step. The self-drilling screws are completed by an optional pre-assembled sealing washer.
The EJOT self-drilling screws JT3 made of A2 stainless steel with hardened drill point made of zinc-plated steel are the economic solution for fastenings in weathered areas. They are suitable for steel or aluminium components and are offered with a maximum drilling capacity of 18 mm. For special requirements, we offer the JT6 made of A4 stainless steel with hardened drill point.
The EJOT self-drilling screws JT2 made of case-hardened zinc-plated steel are the economic solution for fastenings in unweathered areas. They are suitable for steel components and are offered with a maximum drilling capacity of 18 mm.
The EJOT self-drilling screws JT4/JT9 made of A2/A4 stainless steel are particularly suitable for fastening and fixing elements for rear-ventilated facade systems. They are the ideal solution to form sliding and fixed points on substructures of rear-ventilated facades. With a drilling capacity of up to 6 mm, they are above all suitable for aluminium components.
EJOFAST screws are self-drilling screws without the conventional cutting bit. Due to the innovative point geometry and the special thread form, the EJOFAST® screw not only fastens with reduced swarf and at high speed, it also features excellent clamping properties. The EJOFAST® self-drilling screws are particularly suitable for the fastening of thin sheets. They are available in case-hardened zinc-plated steel and in A2 stainless steel with hardened drill point.
The new EJOFAST® self-drilling screw JF3-Plus-6.8 is particularly suitable for the fastening of sandwich panels and trapezoidal profiles to timber substructures with reduced swarf. The self-drilling screw drills through the sandwich panel or the trapezoidal profile virtually with reduced swarf – thanks to its innovative combination thread which combines the positive characteristics of two different thread geometries. The point has the renowned EJOFAST® thread geometry. This geometry grinds the wood fiber and replaces the pre-drilling. The thread merges into a wood screw thread with a diameter of 6.8 mm. Its high pitch diameter offers excellent pull-out values in wood.